Please wait, while We activate your account...
Something went wrong.
HomeYour account has been activated. Please log in using the email/password you provided
Forgot your password? Click here
Select Account
Please submit your email address, and we will send you a new password.
Are you sure you wish to remove this Scene?
Are you sure you wish to remove this Audio?
Are you sure you wish to remove this Background?
Add Audio
Edit Audio
The optional Transcript is used in two ways:
1. For subtitle display (turn ON subtitles in Scene Options).
2. For enhancing lip synchronization quality. The transcript may slightly improve the quality & synchronization of lip animation (for English language audio only - has no effect for other languages).
Requirements
Supported Formats: WAV (PCM), MP3, WMA
Mono or Stereo: Mono (recommended)
Sampling Rate: 22.020 KHz or 44.100 KHz
(22.010 Khz recommended)
Audio Sample Size: 16 bit
Maximum Length: 90 sec.
Advanced Options
Playback Bit Rate
Audio Enhancement
The Audio Enhancement option modifies your audio to achieve a normalized audio volume level. This is achieved by amplifying the audio to take better advantage of the dynamic range.
The effect is most noticeable (and useful) for audios recorded at low volume. Such audios would see the most benefit. For audios which were recorded at high quality, and already take advantage of the full spectrum, enhancement is not needed, and will have minimal impact if applied.
Using Audio Enhancement will normalize all audios to a similar volume level. This helps achieve a consistent user experience, especially if the recordings originate from different sources or different recording sessions.
Engine Id:
Language Id:
Voice Id:
The optional Transcript is used in two ways:
1. For subtitle display (turn ON subtitles in Scene Options).
2. For enhancing lip synchronization quality. The transcript may slightly improve the quality & synchronization of lip animation (for English language audio only - has no effect for other languages).
0
|
45
|
90
|
90 seconds maximum
The optional Transcript is used in two ways:
1. For subtitle display (turn ON subtitles in Scene Options).
2. For enhancing lip synchronization quality. The transcript may slightly improve the quality & synchronization of lip animation (for English language audio only - has no effect for other languages).
0
|
45
|
90
|
90 seconds maximum
To record, Please call:
international: +1 (347) 427-9553
Us/Canada(toll free): (800) 641-8157
You will need the following information handy:
Account ID: 6914282
PIN Number: 1451
The optional Transcript is used in two ways:
1. For subtitle display (turn ON subtitles in Scene Options).
2. For enhancing lip synchronization quality. The transcript may slightly improve the quality & synchronization of lip animation (for English language audio only - has no effect for other languages).
Visit our Voice Talent Store and listen to samples from our talented professionals.
We will record your message, and deliver it back to you within 3 business days.
The process is easy - just pick your voice, and tell us what you want said!
Upload
Facebook
Instagram
Pixabay
Google Drive
* Please select a image
* Please select a image
* Please select a image
Add BackgroundYou May select multiple Backgrounds when uploading. Their names will be their file names.
Supported Formats: PNG, JPEG, GIF, MP4, AVI, MOV
Ideal Size: 1280 x 960 px
You have reached your Licenced Domains limit. Would you like to purchase more?
Are you sure you wish to remove
the Selected Domain(s)?
Upload your own animated GIF to use as your scene loader.
Supported Formats:GIF
Recommended Size:140 x 100 px
Please select a reason for deactivating your account:
Need help? Contact us at support@sitepal.com
Please contact us if you need more time for your Free Trial, or if we can assist with anything. No issue is too small or too complex for us to deal with. We want to help you get the most from SitePal. So, please send us a note and let us know how we can help.
ps. if you missed our Getting Started Guide and other support material and examples - they are available on our support page here:
https://l-www.sitepal.com/support
If you prefer to deactivate your account, please note:
Your account has been deactivated
Please select a valid reason for account deactivation.
Your account has been activated
Are you sure you wish to remove this User?
An invitation email has been sent to this user.
An invitation email has been resent to this user.
Selected Users deleted successfully.
Selected Audios deleted successfully.
Selected Audios downloading started.
Passwords were reset for selected users. An email notification was sent to each user.
Please select a user to perform action.
Please select a audio to perform action.
Your account is INACTIVE. Please click here to reactivate your account.
Your License has expired. Please click here to extend your license.
Your account is INACTIVE. Please click here to reactivate your account.
Your License has expired. Please click here to extend your license.
Your account is INACTIVE. Please click here to reactivate your account.
Your License has expired. Please click here to extend your license.
Step 1: Dimensions
height
Step 2:Placement
Step 3:Scene Options
When Page Loads
secWhen Scene is Done Playing
sec
Step 4:Get Embed Code
Click the 'Copy Code' button to copy the embed code,then paste it into your website's HTML code .
Display Controls 
Never:
Hides the play/pause/replay buttons (aka "Controls").Remove the controls makes sense only if you intend to control speech yourself via the API.
When Needed(recommended)
Controls appear when cursor rolls over the character, and fade when cursor is still pr moves away. On mobile, controls appear when character is touched. This is the default behavior.
Always:
Controls are always displayed.
WHEN SHOULD I USE 'NO JAVASCRIPT' EMBED CODE?
The Standard Embed code is designed to work on all browsers and platforms, including mobile devices. It is efficient to download and looks great at any dimension. It should always be the preferred option.Your account is INACTIVE. Please click here to reactivate your account.
Your License has expired. Please click here to extend your license.
Standard
No Javascript
Responsive
Enable the "Responsive" option to automatically resize your Scene according to available space.
When this option is turned ON, provided dimensions are ignored
Responsive
Enable the "Responsive" option to automatically resize your Scene according to available space.
When this option is turned ON, provided dimensions are ignored
Dimensions
height
Background Color
The background color you select is displayed during loading.The background color you select is displayed during loading, and then covered by your scene's background image (if any).
Click the 'Copy Code' button to copy the embed code, then paste it into your HTML code where you want your scene to appear.
Click the 'Copy Code' button to copy the embed code, then paste it into your HTML code where you want your scene to appear.
Display Controls
Never:
Hides the play/pause/replay buttons (aka "Controls"). Removing the controls makes sense only if you intend to control speech yourself via the API.
When Needed (recommended):
Controls appear when cursor rolls over the character, and fade when cursor is still or moves away. On mobile, controls appear when character is touched. This is the default behavior.
Always:
Controls are always displayed.
Your account is INACTIVE. Please click here to reactivate your account.
Your License has expired. Please click here to extend your license.
Display Message Panel (Whats this?)
Click the 'Copy Link' button to copy the URL link below to your clipboard to be shared as you wish.
Your account is INACTIVE. Please click here to reactivate your account.
Your License has expired. Please click here to extend your license.
How to use publish to Email? Learn More
Display Message Panel (Whats this?)
Thumbnail Dimensions
width height
Click the 'Copy Code' button to copy, then paste it into your email template.
Your account is INACTIVE. Please click here to reactivate your account.
Your License has expired. Please click here to extend your license.
Current Balance:00.00 ( how to add more? To purchase additional video generation minutes, contact sales@sitepal.com. )
This scene: 0:04
The native aspect ratio of SitePal Scenes is 4:3. If you select a different aspect ratio, the Scene will automatically adapt as best possible.
Video Dimensions
height
(max 1600 width x 1200 height)
Background Color
You may use the Scene's own background (if a
background was specified), or select 'Transparent' or a specific color.
Note that only the AVI or MOV formats support transparency in the generated video.
Video format
To generate your video with a transparent
background-
Select the "Transparent" option for background.
Select the AVI or MOV formats that support transparency.
When sharing your SitePal Scene, you can choose to display a panel on the left hand side, containing your logo at the top, and your message displayed below it.
This feature allows you to brand your shared SitePal, and add information useful to the viewer.
If you choose to display the message panel, you must provide either logo or message text or both.
If you choose to display the message panel, you must provide either logo or message text or both.
Don't show this message again.
"Publish to Email" is designed to help you easily add your speaking SitePal avatar message to your html email template. You can use this feature with any popular email messaging platform - or when sending your own html emails.
SitePal cannot animate in the email itself (email clients do not support it). But you can include in your email a thumbnail image which, when clicked, opens a separate tab with your spoken message (we call this the "pickup page").
"Publish to Email" creates a short html code segment, which can be added to your html email to do just that.
Here's what you need to do:
Are you sure you want to proceed?
Generating Your Video
An error has ocured while generating your video.Your account will not be charged.
Are you sure you want to leave?
You will loose your generated video.
Generate a link to post
Post a link to your SitePal Scene, along with your own comment or message text. The Scene will open in a separate tab when user clicks on the link.
Generate a video to post
Post your SitePal Scene as a video. The video will appear within your Facebook post.
Display Message Panel (Whats this?)
Click the 'Post Link' button to post the URL link to your Facebook Wall.
When sharing your SitePal Scene, you can choose to display a panel on the left hand side, containing your logo at the top, and your message displayed below it.
This feature allows you to brand your shared SitePal, and add information useful to the viewer.
If you choose to display the message panel, you must provide either logo or message text or both.
Current Balance:{balance_after_export1} (add more)
This scene: 0:04
Facebook recommends a 16:9 aspect ratio but you may chose any dimensions and SitPal will adjust as best possible.
Video Dimensions
height
(max 1600 width x 1200 height)
Video format
To generate your video with a transparent
background-
Select the "Transparent" option for background.
Select the AVI or MOV formats that support transparency.
Are you sure you want to proceed?
Generating Your Video
An error has ocured while generating your video.Your account will not be charged.
Are you sure you want to close?
You will loose your generated video.
Playback
Play On Load
If "Play On Load" is checked, the Scene is automatically played as soon as it is loaded. You may
Selecting a limit anywhere from "Limit to 1" to "Limit to 5" means that the Scene will be played exactly that many times for each viewer within the time period specified. Selecting "Unlimited" means that the Scene will be played every time the page loads. For example:
"Limit to 1 plays per website visitor per Week"
means that playback of this scene is limited to once a week per each visitor.
The playback limit is implemented independently for each page in which the Scene is deployed. Consequently, if this Scene is embedded in more than one page, there is an individual limit count for each one of these pages.
To prevent automatic playback of the audio within your Scene, uncheck "Play On Load." The viewer will still be able to click the 'Play' button to cause the Scene to play, or you may program the Scene to play by using the VHost API (for example, in response to the viewer's actions).
VHost Studio users: playback limit applies only to embedded Scenes, and does not affect Show playback behavior.
Play On Rollover
Play the audio in the Scene, once per visit, when a user moves the mouse cursor over your character.
Play/Pause On Click
Play or pause the Scene when the user clicks on the Character.
Notice: The Play/Pause button on your skin will reflect this functionality
Audio Volume (0 - 10) Leave blank for default
Play on load
Play on load is subject to browser's limitations. Some browsers (including all mobile browsers) will not allow audio/video playback prior to user interaction with page.
Play/Pause On Click
Video Background Plays Continuously
This option is relevant when a video background is assigned to the Scene. Ignored otherwise.
Display Subtitles
When subtitles are enabled, player will display audio transcript as subtitles during playback.
Link
URL
The target address of the Web page or Web resource for the link. For example:
http://www.oddcast.com
https://www.oddcast.com (secure link)
"Clicking on the scene opens the link" or "link is automatically opened…" is required.
Clicking on the scene opens the link
Open the linked resource when a user clicks anywhere in the Scene.
Link is automatically opened __ seconds after ___
Open the linked resource automatically after the audio message starts or stops. You must ad a delay value, the default value is zero seconds (no delay). For example:
"Link is automatically opened 5 seconds after audio stops." This will launch the URL specified above five seconds after the audio has stopped playing.
Open Link in…
same window
Open the linked resource in the current browser window or frame.
new window
Open the linked resource in a new browser window.
specify target ___
Open the linked resource in the specified (named) window. Examples: "myPopup" or "myFrame".
Note: do not link to the page in which the Scene is embedded.
Clicking on the scene opens the link
Opens automatically
sec after
Open Link in:
Follow Cursor
Do not follow cursor
Character's eyes and head will not follow the mouse cursor.
Follow cursor in scene
Character's eyes and head follow the mouse cursor when the cursor is within the SitePal Player frame.
Follow cursor in whole page
Character's eyes and head follow the mouse cursor when the cursor is anywhere in the host HTML page. JavaScript is required for this implementation.
Note: this setting does not impact full body characters.
A URL must be provided when a Link trigger is enabled. Please enter a URL.
Be sure to review your scene options 
to customize how
the character will appear on the page.
In our experience, its best to keep message fresh, and to limit
the number of plays per visitor.
Don't show me this notice again.
You have run out of video genreration minutes.
Contact sales@sitepal.com to get more.
Cancel
Ok
Please Note:If Secure Playback is enabled, you MUST specify Licensed Domain(s) for the web pages in which your SitePal Scenes are embedded.
Your Scenes will only work on web pages that are loaded from one of the Licensed Domains you specify.
Are you sure you wish to remove this Property?
Are you sure you wish to remove this Concept?
This will compile the AIML files to the STAGING AI Engine.
This will NOT effect the LIVE AI Engine. This action can
take up to 3 minutes.
This will transfer the STAGING AI Engine to the LIVE AI
Engine. A down time of up to 3 minutes should be
expected on the LIVE AI Engine.
This feature is not available for your account.
Please upgrade your account.
This feature is not available for your account.
Please upgrade your account.
Video Generation is not support on this Browser. Please try a different browser to use this feature.
Enter a Keyword and a response (or multiple responses). Each time the keyword is encountered in conversation, your Bot will randomly select one of the responses you provide.
You may also enter multiple keywords that shares the same response set. To do so, enter them as a comma seperated list.
For example: friend, friends, firendly, friendship.
Are you sure you wish to remove this FAQ App?
Are you sure you wish to remove the Key?
Please fill out this form and we will get back to you as soon as possible. Most messages are answered within 24 hours.
Before submitting your query - please check out our FAQ - the information you are looking for may be available there.
